Posted June 3, 2010 · Report post Was wondering if there was info on my johnson #0278? The rifle is all there but rear stock is cracked in a couple places and the barrel rifling is getting low. Thanks P.S I LOVE THIS RIFLE! Share this post Link to post Share on other sites
Posted June 3, 2010 · Report post Here is the available data on JSAR #0278: Received from Cranston Arms - Not listed Stock # Not listed BBL #908E Hammer block #0440 Hammer #0327 Bolt #363 Locking cam #121 Firing pin #1080 Extractor #358 Magazine #1093 Transferred to Netherlands Purchasing Commission 9/29/41 This one may have actually made it to the Dutch East Indies before it fell to the Japanese. Let us know if anything matches. Share this post Link to post Share on other sites
Posted June 4, 2010 · Report post Thanks Brian Alpert for the super fast info.I retrieved all my numbers off my JSAR .BBL# 1052e Hammer Block#0440Hammer#0327Bolt#363Locking Cam#121Firing Pin#1060Extractor#1611Magazine#1093So as you can see more than half still has the original parts. Thanks again for the info. Share this post Link to post Share on other sites
Posted June 5, 2010 · Report post If you have a cracked stock you can have it repaired at http://www.dgrguns.com/ He had done several for me with great success. Make sure you have cleance at the rear of the stock and receiver so that the wood is not getting hammered by the stock, this can cause it to RE-Crack. HTH, Mitch J. Share this post Link to post Share on other sites