Sign in to follow this  
Followers 0
Ed Johnson

New Article on Johnson

1 post in this topic

                                             8/17/2018 Fri 7:15 PM EDT
 
Over the years, many folks have asked about my family history relating to firearms.
 
The following is an article assembled by my niece, Shannon E. Johnson. It is based on the military inventions of my father during WW II and thereafter.,
 
 Copyright sources for research on the topic that was used for this article include, “Johnson Rifles and Machine Guns” by Bruce Canfield, with material from Robert Lamoreaux and Edward Johnson, published by Andrew Mowbray, Inc. (2002); “The Johnson Rifle Site” at www.johnsonautomatics.com managed by James Pullen; “Practical Marksmanship” by MM Johnson, Jr., published by William Morrow & Co. (1945), as well as information provided in the two videos attached.
 
The videos themselves, a short one towards the beginning and the longer one later in the article, were produced by the National Rifle Association. Speakers and narrators include Mark O'Keefe, Martin Morgan, author Bruce Canfield, Kenneth L. Smith-Christian and Michael Parker.
 
In addition, some footnotes refer to articles based on manuscripts from 1984 American Rifleman articles written by my brother, Melvin M. Johnson, III and historian Robert Lamoreaux.
 
The link to the live article is  https://hookedoneverything.com/melvin-maynard-johnson/
(cut and paste to your browser if necessary)
 
The link will also bring up the photos and video, and the article is also on Facebook, complete. Below is the basic article minus the videos (blank spaces).
 
 
Hooked on Attorneys Hooked on Education Hooked on Inventions Hooked on Legends

Melvin Maynard Johnson, Jr.

2 weeks ago
213,426 Views
Melvin_M_Johnson_Jr.jpg

Melvin Maynard Johnson, Jr – Lawyer, author and more notably inventor.  Melvin Maynard Johnson, Jr. goes by many titles all of which are well deserved by this fledgling overachiever, but to his family and friends, he was known as Maynard.

MMJjr.jpgGoogle Photos

Ambitious to a fault and ingrained with a proven sense to innovate, Melvin Maynard Johnson, Jr. was born into a rather affluent Boston, Massachusetts family in 1909.  He was the son of renowned lawyer, college professor, author and co-founder of Johnson and North law firm, Melvin M. Johnson Sr.  Unsurprisingly, Melvin Maynard Johnson, Jr. took a calling in law, graduating Harvard in 1934 before going on to practice until 1939.  However with his fervor for law also came a contrasting passion for firearms, a reality that ultimately shaped his eventual path in life as the persistent lieutenant.

Melvin Maynard Johnson, Jr. was commissioned into the Marine Corps Reserve as a second lieutenant in 1933.  By virtue of this position, he was privileged to attend a slew of Marine Corps firearms programs and in the following years managed to develop and demonstrate a keen understanding of the mechanism and operations of firearms.  So profound was his understanding that it influenced the decision of the United Automatic Rifles Corp to contract his father’s law firm, Johnson and North, as legal representatives.  U.A.R.C’s foray with Johnson and North provided the young Johnson an avenue to test his skills.  And test he did.  In collaboration with the former, Johnson developed a semi-automatic rifle system based on the M1903 Springfield.  Unfortunately, the prototype failed to meet preliminary expectations and was subsequently scrapped.

JohnsonRifles.pngGoogle Photos

Rather than bow out in disdain, failure on the first attempt had instead sparked creativity and a zeal to innovate in the young lieutenant.  By 1936, he was back on the drawing board, this time perfecting designs for a semi-automatic rifle with a unique short recoil operating system.  Johnson had succeeded in coming up with a working model that when implemented could compete against the Garand, – the de facto rifle of the US army.  August that same year the first prototype of what would become the M1941 Johnson rifle was fabricated.  Johnson named it Betsy.  Betsy had a cousin named Emma.  It was his attempt at developing a fully automatic light machine gun capable of firing 1,200 rounds per minute.  Emma would go on to form the basis of the M1941 light machine gun.  Seeing the Johnson light Johnson’s prototype firearms were innovative, no doubt, but amongst other things, they provided practical solutions to the many deficits commonplace in weapons at this time.

Video Player
 
 
 
00:00
 
03:13
 
 
 

In designing his guns, Johnson made certain to address these inherent flaws.  The Garand, for instance, as Johnson noted had an ‘en bloc’ clip that was hard to reload in combat situations and a gas bleed system that was particularly susceptible to damage.  On paper, his designs were technically more superior, and a number of key stakeholders saw this light.  In 1937, Johnson entered a contract with Marlin Firearms that would see the later manufacture models of Johnson’s prototype firearms.  By March 1938, three rifle pieces aptly named rifle number 1, Rifle number 2 and Rifle number 3 were fabricated for testing.

MMJ-Jr-book-196x300.jpgGoogle Photos

After extensive rounds of testing by both Britain, America and Netherlands, it was the Dutch who saw it fit to procure 500 units of light machines guns and another 14,000 units of Johnson semi-automatic M1941 rifles.  Johnson had made his first official sale, and it was a sign of better things to come producing better and more capable firearms Johnson went on to set up the Johnson Automatics Trust, which later evolved into Johnson Automatics Inc.  Under this umbrella, he was able to further advance the practicality, efficiency, and ingenuity of his firearms.  The light machine gun as at the time of presentation to the Dutch featured a magazine support assembly in place of rotatory magazines, integrated feed lips, and like the rifle came with the inherent capability to be refilled with single cartridges without removing the magazine.  Johnson’s Light machine guns would then go on to be adopted and used by the Marines and Specialized units of the US army for the most of world war II.

MMJjrCommission.gifGoogle Photos

Sequel to WWII Johnson expanded his firearm production reach to cover for civilian demand.  By the early 1950s on account of his burgeoning expertise and knowledge of firearms, he was brought into Winchester as a weapons designer and advisor by the then chairman of the company, John Olin.  At this stage, Johnson had four unique patents to his name some of which were later used on the AR-50 and AR-10 by Armalite.

Video Player
 
 
 
00:00
 
11:07
 
 
 

If anything Johnson’s continual involvement in the scene of firearms production up until his death in 1965 emphasizes just how pivotal he was to the development of firearms in the US.  More importantly, however, it paints a lucid picture of what determination, intelligence and a knack for the daring can transcribe to in the real world setting – a persona that breaks barriers and leads the charge on innovation.

  • Sources: Copyright sources for research on the topic that was used for this article include, “Johnson Rifles and Machine Guns” by Bruce Canfield, published by Andrew Mowbray, Inc. (2002); “The Johnson Rifle Site” at www.johnsonautomatics.com managed by James Pullen; “Practical Marksmanship” by MM Johnson, Jr., published by William Morrow & Co. (1945), as well as information provided in the two videos attached.
 
Here is the basic article itself:
----------------------------------------------------------------------------------------------------------------------------

Melvin Maynard Johnson, Jr.

Melvin_M_Johnson_Jr.jpg

Melvin Maynard Johnson, Jr – Lawyer, author and more notably inventor.  Melvin Maynard Johnson, Jr. goes by many titles all of which are well deserved by this fledgling overachiever, but to his family and friends, he was known as Maynard.

 

Ambitious to a fault and ingrained with a proven sense to innovate, Melvin Maynard Johnson, Jr. was born into a rather affluent Boston, Massachusetts family in 1909.  He was the son of renowned lawyer, college professor, author and co-founder of Johnson and North law firm, Melvin M. Johnson Sr.  Unsurprisingly, Melvin Maynard Johnson, Jr. took a calling in law, graduating Harvard in 1934 before going on to practice until 1939.  However with his fervor for law also came a contrasting passion for firearms, a reality that ultimately shaped his eventual path in life as the persistent lieutenant.

Melvin Maynard Johnson, Jr. was commissioned into the Marine Corps Reserve as a second lieutenant in 1933.  By virtue of this position, he was privileged to attend a slew of Marine Corps firearms programs and in the following years managed to develop and demonstrate a keen understanding of the mechanism and operations of firearms.  So profound was his understanding that it influenced the decision of the United Automatic Rifles Corp to contract his father’s law firm, Johnson and North, as legal representatives.  U.A.R.C’s foray with Johnson and North provided the young Johnson an avenue to test his skills.  And test he did.  In collaboration with the former, Johnson developed a semi-automatic rifle system based on the M1903 Springfield.  Unfortunately, the prototype failed to meet preliminary expectations and was subsequently scrapped.

JohnsonRifles.png

Rather than bow out in disdain, failure on the first attempt had instead sparked creativity and a zeal to innovate in the young lieutenant.  By 1936, he was back on the drawing board, this time perfecting designs for a semi-automatic rifle with a unique short recoil operating system.  Johnson had succeeded in coming up with a working model that when implemented could compete against the Garand, – the de facto rifle of the US army.  August that same year the first prototype of what would become the M1941 Johnson rifle was fabricated.  Johnson named it Betsy.  Betsy had a cousin named Emma.  It was his attempt at developing a fully automatic light machine gun capable of firing 1,200 rounds per minute.  Emma would go on to form the basis of the M1941 light machine gun.  Seeing the Johnson light Johnson’s prototype firearms were innovative, no doubt, but amongst other things, they provided practical solutions to the many deficits commonplace in weapons at this time.

 
 
 
 

In designing his guns, Johnson made certain to address these inherent flaws.  The Garand, for instance, as Johnson noted had an ‘en bloc’ clip that was hard to reload in combat situations and a gas bleed system that was particularly susceptible to damage.  On paper, his designs were technically more superior, and a number of key stakeholders saw this light.  In 1937, Johnson entered a contract with Marlin Firearms that would see the later manufacture models of Johnson’s prototype firearms.  By March 1938, three rifle pieces aptly named rifle number 1, Rifle number 2 and Rifle number 3 were fabricated for testing.

MMJ-Jr-book-196x300.jpg

After extensive rounds of testing by both Britain, America and Netherlands, it was the Dutch who saw it fit to procure 500 units of light machines guns and another 14,000 units of Johnson semi-automatic M1941 rifles.  Johnson had made his first official sale, and it was a sign of better things to come producing better and more capable firearms Johnson went on to set up the Johnson Automatics Trust, which later evolved into Johnson Automatics Inc.  Under this umbrella, he was able to further advance the practicality, efficiency, and ingenuity of his firearms.  The light machine gun as at the time of presentation to the Dutch featured a magazine support assembly in place of rotatory magazines, integrated feed lips, and like the rifle came with the inherent capability to be refilled with single cartridges without removing the magazine.  Johnson’s Light machine guns would then go on to be adopted and used by the Marines and Specialized units of the US army for the most of world war II.

MMJjrCommission.gif

Sequel to WWII Johnson expanded his firearm production reach to cover for civilian demand.  By the early 1950s on account of his burgeoning expertise and knowledge of firearms, he was brought into Winchester as a weapons designer and advisor by the then chairman of the company, John Olin.  At this stage, Johnson had four unique patents to his name some of which were later used on the AR-50 and AR-10 by Armalite.

 
 
 

If anything Johnson’s continual involvement in the scene of firearms production up until his death in 1965 emphasizes just how pivotal he was to the development of firearms in the US.  More importantly, however, it paints a lucid picture of what determination, intelligence and a knack for the daring can transcribe to in the real world setting – a persona that breaks barriers and leads the charge on innovation.

  • Sources: Copyright sources for research on the topic that was used for this article include, “Johnson Rifles and Machine Guns” by Bruce Canfield, published by Andrew Mowbray, Inc. (2002); “The Johnson Rifle Site” at www.johnsonautomatics.com managed by James Pullen; “Practical Marksmanship” by MM Johnson, Jr., published by William Morrow & Co. (1945), as well as information provided in the videos.

Excuse the accidental duplication of some material above. Old age is catching up to me!   Ed J

Edited by Ed Johnson
additional correction on footnote dates

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0