I have inherited a rifle from my wife's grandfather's collection. He passed away over 20 years ago. My wife's grandmother has moved into assisted living, so the firearms collection is being broken up. Since the family knows that I enjoy collecting military firearms, they gave me the Johnson Rifle. The receiver reads: CAL.30-06 SEMI-AUTO. "JOHNSON AUTOMATICS" MODEL OF 1941 MADE IN PROVIDENCE, R.I.,U.S.A. 61XX The parts are numbered as follows: Trigger Frame 6205 Hammer 9293 Drum Mag A3644 Link and Locking Cam 6323 Bolt 7634 Firing Pin 3959 Extractor 5307 Barrel which is marked "CAL. 7m/m" 5770E On the bottom it is marked "NAVY ARMS CO.,RIDGEFIELD,N.J. U.S.A." The stock has a "L" and a larger "I" next to the drum mag and a "4." at the bottom of the pistol grip and the left side of the stock which look like the military configuration stocks on the site. There are a few nicks here and there with a small crack in the middle of the left side that doesn't reach any ending points of the stock. The rifle came with a simple leather sling and a bayonet with a sheath. The bayonet looks like the originals on the site, but the sheath is very different. Instead of the retaining strap coming straight across, it comes across just above the barrel loop and goes straight down. The end of the sheath is square, being approximately 3/4" straight across with a V-shaped reinforcement. There is a separate flap for the belt loop on the back side. Behind the flap on the sheath are the letters: EC 942 AMT The stuff has been in a gun cabinet at least 20 years. I don't see any pitting. Since none of the parts have the same serial #, I'm guessing this was put together by Navy Arms. Any information about what kind of 7mm ammunition the rifle would take, I would appreciate. Since all the other examples seem to be of 30.06 that's what I thought it was. Sorry, but I can't find my digital camera, so I've got no way to post or send pictures. Thanks again for any info. Scott