tricky9914

The 34 is live :-D I also have an MP40 and a Japanese Type 96... All NFA firearms. Unfortunately, I don't have any US MG's to compliment the Johnson Rifle.

**I am sorry if this thread is violation of any forum rules, but my excellent experience with Jospeh Scott warranted a separate thread. Please remove if need be** I recently purchased a JSAR rifle that had alot of honest ware, including a badly cracked and used stock. I saw Joseph Scott's ad for his repros stocks, as well as other forum member recommendations, so I though I would give him a try. Being a novice, I asked if he would accept my current stock with all hardware, and transfer the hardware over to the new stock for me (since I know swapping the recoil tube could be tricky to a lyman like myself). He kindly accepted the job so I sent my stock and payment off to him. 5 days later, I recieve my original stock and his replacement and all I could say was "WOW!". It totally brought my rifle back to life and it fits probably better than the original that was on it! It just looks like a million bucks and I am thoroughly impressed with his master craftsmanship. Furthermore, he followed my instructions to have the finish match the same shades and ware patterns as my original (so it would match my original handguard), which he did almost flawlessly. Also, he replaced what happened to be "incorrect" buttplate screws AND CLEANED UP AND IMPROVED MY ORIGINAL BROKEN STOCK (which he did without me asking him to, or paying him to). I just can't express how happy I am with this transaction, his attention to detail and customer service. I HIGHLY recommend working with Mr. Scott. THANKS!

Thank you very much for the information, Brian! I really appreciate you taking the time to share your knowledge. You are very helpful!

Hello, I know there are a few threads regarding the barrel markings on this forum. However, I had a particular questions I can't seem to find the answer to online. My JSAR barrel has the "I/Sword/O" marking on the barrel just forward of the barrel trunnion on the underside, and a serial number on trunnion. There is no serial number on the barrel itself and no "JA 30-06" marking on the barrel. The collar says "30-06" and "41". Question is, I have seen barrels with 30-06 markings on the barrel but no "sword" markings (which are usually regarded as replacements or non-originals), but not the other way around (like mine). Was it normal to be found in this configuration? Since it lacks the "30-06" markings, does that mean this is non-original barrel?

PM Sent

Thanks again, Brian. I am going to message him for a repair quote. Another question for you: This stock in question is "thin" which does not have laminated (or solid) bulges that contour the rotary magazine. I know that stocks were made with thinner blanks, in order to diminish excessive wood waste, and laminated "cheeks" were affixed on later, but was it common for JSARs to leave the line with just a thin stock? Photos are attached. st 2 st 1

Thank you for your expedient and helpful response. Is Joseph Scott a member on this forum? Is there a way of connecting with him? I do have an original stock, but, like you said, it is in very poor condition. There are two large cracks leading from the tang, and a chunk of wood missing from the left side of the rear of the wrist... I feel like the entire back tang/wrist area of the stock would need to be cut out and replacement wood fitted into it. It is also a "thin" stock without the bulge which would otherwise contour around the sides of the circular magazine. Any reputable wood-workers here?

Hello, I am looking for an original 1941 Johnson rifle stock... Of course, these are difficult to find, be it original or repro. Does anyone here know of a reputable source who might have one for sale? I am also planning on going to the "Show of Shows" in KY next month - does anyone know the chances of finding one there? Also, when I do find a stock, should I be concerned about it fitting correctly? I know JSARs were meticulously manufactured, so are stocks one size fits all? Also, can anyone recommend someone reputable who can do repair or restoration work on a stock in very poor condition? Thanks for all your help!

Hey Brian! Planning on hitting the National Gun Day show on Sunday. Will you be around? Also, do you happen to know the address of the location? Can't seem to find an address online. It is open until 3:00PM on Sunday, right? Thanks! Chris

I know I'm kind of late on this thread, but here is some information that might help - I had wondered the same thing myself. In Bruce Canfield's book, "Johnson's Rifles and Machine Guns," copyright 2006, in the "Collector's Notes for the M1941 Johnson Rifle" section on page 252 he writes the following: "The area of the stock behind the rotarty magazine will typically have a section of laminated wood inletted. This was neccessary because of the configuration of the stock in this area and does not indicate that the stock has been "patched" or otherwise altered. The chief reason for the laminated wood in the area was that it enabled narrower (2-inch) stock blanks to be used. It should be noted that some original Johnson stocks did not have the laminated wood which indicates that thicker wood blanks (3-inch) were utilized. While "solid" stocks were used on some original Johnson rifles, the laminated stocks are the most commonly encountered variety. Collectors today should realize, however, that most of the reproduction Johnson stocks, including the stocks used by Winfield Arms, do not have the laminated area. There does not appear to be any specific time frame or serial number range for original Johnson rifles that left the factory with laminated stocks or solid stocks. The use of both varities seems to have been interspersed during production and was likely a case of using whatever size stock blanks were on hand."

Brian, Thanks from the offer! I am definitley planning on making it down there. I have heard great things about that show. I will find you and introduce myself - I would be excited, at the very least, to see your table of goodies! Thanks again! Chris

I am located in Indianapolis, IN. The news paper is a great idea. Will give that a try!

Thanks for the note! One went on Gunbroker at a Buy It Now for $4k in original condition, and one on the CMP forum for $4.5. I just missed both of these by several hours, but they were both just in the past month - so these deals do exist... I actually tend to see them go in the $4k range more often then I see them sell in the 5-6k range.... I just need to be around when the deals pop up! LOL. Nice story on the trench gun! I actually got a M1897 Winchester in origianl and complete WWI era condition (non-takedown) in about 80% condition for $1,600 about 6 months ago. Love to stumble accross these finds! Thanks again and take care! Chris

Hello, I am new to this site. I have been a long time collector of WWII era firearms, and now am in search of a M1941 Johnson. Does anyone have a good source as to where I can locate one for sale? I have tried Gunbroker, Auctionarms, Gunsamerica, Gunboards, CMP Forum and now here. I cannot seem to find any reasonable deals on a military correct, unaltered example. I am looking to spend between $4k-$4.5k... All I tend to find are blued rifles in repro stocks, or originals with $6k+ tags and no takers. Any help would be great! Does anyone have one for sale or know of a local shop in their area? Thanks!