Is anyone interested in a upper receiver

[MGPREACHER76 0]

Hello everyone,

I recently aquired a M1941 upper receiver and bolt. It was pretty dirty so I put it in the parts washer which removed the factory parkerizing, I wanted to check the receiver for cracks anyway. The receiver itself is solid and would make a great spare or builder. There are two small spots where at some point in time someone Tig welded spots (both smaller than 0.5")  

I originally wanted to build it, but sourcing all the other pieces seems like it would be quite the treasure hunt. So I have decided to sell it to someone who may need it. Let me know if you may be interested. 

IMG20230412181656.heic

[camstuff 0]

One glaring problem is this receiver is not complete. The back end has been cut off.  The bolt stop will not attach properly.  I would unfortunately consider this useless.   Might be some good bolt parts though. 

[matconcrete 0]

Could you show a photo looking at the rear portion?

[maconners 0]

Sold for 250 on ebay. 

 

 

 

[camstuff 0]

He sold the receiver on eBay?  Or did you mean gunbroker. 

[ArtR 0]

I was surprised as well, and did find it on ebay with several other 'gun' items

[Rarecat 0]

Yikes!!!!

[metrotps 0]

eBay is full of errors like this. Lots of items slip through.

[camstuff 0]

I’ve seen high capacity magazines sell, but never a receiver. The seller and buyer took some public risks with this one. 

[eb in oregon 0]

On 4/14/2023 at 7:13 PM, camstuff said:

One glaring problem is this receiver is not complete. The back end has been cut off.  The bolt stop will not attach properly.  I would unfortunately consider this useless.   Might be some good bolt parts though. 

I think it fractured and was not cut off. I could be wrong however the fracture follows the contour of the receivers features. Regardless I've a bit of an issue of the seller claiming "it's easily repairable."

[matconcrete 0]

That portion you have circled looks suspiciously like an lmg receiver.

[Rarecat 0]

14 hours ago, matconcrete said:

That portion you have circled looks suspiciously like an lmg receiver.

I had the same thought, someone started a Semi LMG Project and bailed

[matconcrete 0]

Yup, that makes sense.

[M48TANKER 0]

I believe the lower receiver, with it's full auto hammer/trigger/sear intact, would be the only item of interest to the BATFE. The upper receiver is not, by itself, a restricted part.

Someone correct me if I'm mistaken. (I'm never wrong...but once I thought I was wrong and it turned out I was only mistaken)

[Rarecat 0]

That makes too much sense, we are talking about the BATFE here.  The way I understand it, the upper is the serialized part and is therefore considered the gun or controlled part.

[ArtR 0]

The first image still looks like a JSAR upper, though shows signs of tampering

[eb in oregon 0]

On 4/18/2023 at 3:05 PM, matconcrete said:

That portion you have circled looks suspiciously like an lmg receiver.

Not a chance. The LMG had an entirely different top receiver.

[matconcrete 0]

Hi Eb,

the close up of the rear cut portion is what resembled an lmg 😊

[eb in oregon 0]

On 4/22/2023 at 7:53 AM, matconcrete said:

Hi Eb,

the close up of the rear cut portion is what resembled an lmg 😊

Something happened to the pictures, I can't get them to post. Please remove.

johnson.webp

johnson lmg.webp