Bob G.

I have a Murray buttstock. I had to wait a year for it. At the time he made it he could not find anyone to drill the stock for the mainspring tube. Joe Scott drilled it for me and installed

the tube. It came out perfect ! The stock was very nice with little to no inletting needed. He may still sell them unfinished,undrilled.

Bob G.

I received my butt stock from murrays gunstocks,It was sent without a recoil spring tube hole drilled as he is unable to do it. I sent it out to be drilled and it came back perfect.

Bill ( rifleman) sent me a recoil tube which was installed after the stock was drilled (by the forum member that drilled the stock ). I now have a fully functional Johnson rifle !!

I would like to thank Brian, Bill, and Joseph for all the help and parts but mostly that they stepped up to help me get my Johnson working. I would be unable to do this on my own. I am very happy to belong to this forum with all the members knowledge that they are so willing to share.

Bob G.

Murrays Gunstocks is sending me a Johnson buttstock without the mainspring hole drilled. He will sell them that way if you can drill your own hole for mainspring tube.

That would be awesome , please keep the forum updated !!

Bob G.

Bill

As of now I don't have a stock, I do have a mainspring, and all the parts except the recoil tube. I have been waiting for a buttstock from Murrays Gunstocks for over a year now.

Sent a deposit and all I get is lip service. So really what I need is a recoil tube and a buttstock. 

Regards

Bob G.

Bill

Would you have a recoil tube for sale ? I've been looking for one with no luck yet.

Thanks

Bob G.

Bill

If you find a source for the mainspring tube please pass on the info. as I need one also.

Bob Gorton

thruxton1966@msn.com

Ed

Did you hear back from Randy ?

Have not heard anything from Randy Murray about my buttstock order in June, anybody find a new source yet ??

Bob G.

On 6/6/2017 at 10:25 AM, Bob G. said:

I have sent a deposit to Randy Murray for a buttstock  with a mainspring tube installed. Will keep the forum informed of progress.

Have not heard anything from Randy Murray ,anyone find a new source for buttstocks ??

I got an email from Randy Murray yesterday and he is still looking for a good pattern Johnson stock to copy.

Bob G.

Brian

Do you have the parts I need or do I purchase from someone else ? If you have them I am ready to purchase now.

Bob 

Brian,

Sounds good, I have a rear sight assembly,not sure if it complete. I think I would like the type 2 sight base if possible. Can your gunsmith or you supply the needed parts ?

Bob

Brian

My son helped me to send photos, what do you think? Is it a possible to make a semi auto out of this ? The rear section of the two piece bolt is cut, the firing pin has a 1/4 inch cut off the rear and the ejector was cut in half. Can you get an estimate of costs please. I am very serious on getting this done.

Regards

Bob Gorton

Brian

I am interested in the conversion to semi fire only. Do you have an estimate on the costs ?

thanks

Can a demilled 1941 Johnson LMG be rebuilt as a semi auto only.

Will do !

That stock has been on for quite some time, then relisted again. Looks rough.  I think I would rather have a new one even if it is a repro.

Murrays Gunstocks  541-340-9814  in Idaho.  He also has a website, Murrays Gunstocks

Ed

I don't know but you could check with Randy Murray .

Mike

That is my understanding, someone in Az. You would have to talk to Randy to get his contact info. I talked to Randy last week and he said he is ready to go making the stocks and

is accepting deposits. ($100.00)

Bob Gorton

I have sent a deposit to Randy Murray for a buttstock  with a mainspring tube installed. Will keep the forum informed of progress.

Does anyone have a mainspring tube for sale or know of a source and I am still looking for a Buttstock. No luck trying to contact Joe Scott so far.

Bob G. in Vermont.

M48TANKER

I would interested in your front sight and bayonet lug if you decide to sell separate

Regards

Bob Gorton

thruxton1966@msn.com